Codex auxiliary-preset V2: all four Creator 5 slots explicitly reference one embedded auxiliary-fan-off inherited preset. Open as a project and re-slice. Other settings, colours and geometry unchanged. Changing presets can restore their values. GUI/slice/physical fan behaviour not newly verified.

Final Codex & shared tools

13 October 2026 · Grey, gold and cream · V06, 0.6 mm rear symbols

Jon reports the Codex and tools printed and final. One coloured project contains the book and all five tools on two plates. Creator 5 auxiliary fan is off for every saved filament slot; part cooling and exhaust remain unchanged. Open as a project and re-slice.

Print files

Prefer the 3MF for the book. STLs carry neither colours nor printer settings. The book STL preserves exact source coordinates, including inherited microscopic degeneracies; inspect slicer repairs and sliced layers. Wheel and grille STLs retain their reverse marks.

Actual file views

Bill Of Materials

CODEX SHARED TOOLKIT — quantities per kit
1 upright print-in-place book: 137.5 x 41.3 x 190 mm; two moving physical bodies,
  six aligned material regions in the coloured project. Do not split those regions.
1 wheel base: 110 x 110 x 12.4 mm.
1 printed retaining screw: 22 x 20 x 8.25 mm.
1 inner wheel/retainer: nominal 58 mm diameter x 5.2 mm.
1 zodiac ruler: 170 x 34 x 3.6 mm, 150 mm marked span.
1 archive grille: 110 x 146 x 2.4 mm; twelve windows and counted corner marks.
Optional closure: four 6 x 3 mm disc magnets; dry-fit inherited pockets and secure.
No separate metal hinge pin or metal screw is required.
Game-specific middle wheel rings, game PDFs, sigils and access are not included.
Native filament slots 1 and 4 grey; slot 2 gold; slot 3 cream.

Printing And Assembly

PRINTING AND ASSEMBLY
Units millimetres, scale 100%. Book upright in supplied orientation; tools flat.
Reference machine: Creator 5 Pro, 0.4 mm nozzle, PLA. Saved project settings are
not universal certification. Auxiliary fan speed is zero in every filament slot.
Re-slice after opening. Verify fan settings if changing filament presets.
Review hinge clearances, roof/support closing layers, first layer and prime tower
toolpaths before sending to your printer. This pack does not claim a tower remedy.
Book STL preserves exact source-union coordinates with 17-digit ASCII precision.
It has inherited microscopic degeneracies/float32 warnings: do not accept automatic
repair blindly. Compare repaired geometry, hinge gaps and sliced layers to the 3MF.
Cool fully before gently freeing the print-in-place cover. Do not force fused joints.
Dry-fit closure magnets, check polarity, and retain them securely. Keep loose magnets
and small parts away from children and pets.
Assemble wheel base, appropriate game-supplied middle ring, inner retainer and printed
screw. Do not stack an extra centre. Check rotation without overtightening.
Keep both grille faces/counted corners and underside wheel outlines readable.
Check ruler marks, grid registration, storage fit and closure on the actual print.
Reset by removing game-specific evidence and restoring the tool positions. This pack
does not include game solutions, reset codes, activation or experience instructions.

Quality Checklist

MAKER/BATCH CHECKLIST — blank, not a completed inspection
[ ] Record printer, nozzle, filament, profile and exact file edition.
[ ] Auxiliary fan remains zero after preset changes and fresh slicing.
[ ] First layer adheres; tower/toolchanges and support paths inspected.
[ ] No unintended cream leaks; grey binding/tools and gold/cream regions correct.
[ ] Cover moves freely, closes and has intact hinges.
[ ] Rear symbols at 0.6 mm are readable; registration and coordinates preserved.
[ ] No top teeth; flat bottom and other retained internals correct.
[ ] Wheel/screw turn; reverse wheel outline and grille engraving readable.
[ ] Grille windows open, both faces/marks clear; ruler markings intact.
[ ] Magnets retained safely; tool storage and any game ring dry-fit checked.
Signed: __________________  Date/batch: __________________

Maker Usage

STATUS AND USAGE
Final geometry approved by Jon, who reports printing the Codex and tools.
The auxiliary-fan-off variant is a later setting-only change, not a newly printed
or freshly target-sliced edition. Digital checks are not all-printer, longevity,
commercial manufacturing, accessibility or human game-play certification.
Actual-model renders are technical references, not photographs or cleared promotional
art. This shared Codex/toolkit pack is separate from every game's materials.
No change to existing licence/redistribution/commercial manufacturing rights is granted
by this pack. Website access/download terms remain the publisher's responsibility.
Credit The Printed Secret; preserve functional marks, windows, clearances and scale.