Codex auxiliary-preset V2: all four Creator 5 slots explicitly reference one embedded auxiliary-fan-off inherited preset. Open as a project and re-slice. Other settings, colours and geometry unchanged. Changing presets can restore their values. GUI/slice/physical fan behaviour not newly verified.

PRINTING AND ASSEMBLY
Units millimetres, scale 100%. Book upright in supplied orientation; tools flat.
Reference machine: Creator 5 Pro, 0.4 mm nozzle, PLA. Saved project settings are
not universal certification. Auxiliary fan speed is zero in every filament slot.
Re-slice after opening. Verify fan settings if changing filament presets.
Review hinge clearances, roof/support closing layers, first layer and prime tower
toolpaths before sending to your printer. This pack does not claim a tower remedy.
Book STL preserves exact source-union coordinates with 17-digit ASCII precision.
It has inherited microscopic degeneracies/float32 warnings: do not accept automatic
repair blindly. Compare repaired geometry, hinge gaps and sliced layers to the 3MF.
Cool fully before gently freeing the print-in-place cover. Do not force fused joints.
Dry-fit closure magnets, check polarity, and retain them securely. Keep loose magnets
and small parts away from children and pets.
Assemble wheel base, appropriate game-supplied middle ring, inner retainer and printed
screw. Do not stack an extra centre. Check rotation without overtightening.
Keep both grille faces/counted corners and underside wheel outlines readable.
Check ruler marks, grid registration, storage fit and closure on the actual print.
Reset by removing game-specific evidence and restoring the tool positions. This pack
does not include game solutions, reset codes, activation or experience instructions.
